What Happened To The Old Case That Got Cooler Thanks To The Rgb Fan?

bestbuy618 technology

RGB fans are a type of light effect accessory that many installers, particularly gamers, choose to install. Cool light pollution can provide a great ambient light effect when using a computer. Today, I followed the trend and installed this BoneGard XCB cooling fan to keep my old case cooler.
bestbuy618 technology

This Bone XCB cooling fan for 3 has a very rich effect in the light, the product cover can be seen, this is a multi-segment area light fan, the actual installation effect is very bitter. ‘
bestbuy618 technology

A controller and a remote control are included in addition to the three fans.
bestbuy618 technology

The top of the remote control has a lot of buttons, as you can see. Simply put, after the fan is installed, the remote control can change the light effect and wind speed, and the light effect can be selected from the fixed light effect or the illumination dazzle mode. ‘
bestbuy618 technology

The controller is used to connect the fans; a total of eight God’s light interface and six LED fans can be connected, which is more than enough to completely fill the case. ‘
bestbuy618 technology

Because the LED interface is a 3PIN port, this set of BoneGard XCB cooling fans with the fan must work flawlessly. ‘
bestbuy618 technology

The fan has nine blades. In addition to the 6-segment light-emitting bezel, the rotating fan blades will also light up. ‘

The fan is made of pure copper hydraulic bearings and can reach speeds of up to 1000 rpm. With a gentle hand toggle, it will rotate at high speed, and the actual running noise is very low. ‘

bestbuy618 technology

For first-time players, the installation process can be a bit difficult, but knowing how to connect the fan and the controller is helpful, and veterans can complete the installation in minutes. ‘

The first is to connect the controller to the host, the second is the power supply, and the third is to accept the signal from the motherboard. Three lines are actually only required to connect two lines, according to the motherboard’s interface. ‘

bestbuy618 technology

0 The fan is then attached to the host, and the material at the four corners of the screw fixing is designed as a soft pad that can be effectively fixed on top of the chassis. ‘
bestbuy618 technology

1
bestbuy618 technology

2 After finishing the installation, the fan will be connected to the controller; the two wires on the fan should be plugged into the controller above, the root wire to control the rotation and the root wire to control the LED lights, respectively. ‘
bestbuy618 technology

3 Turn on the computer after finishing the installation to see the result. When the fan is turned on, the cool RGB light pollution is fantastic. ‘
bestbuy618 technology

4 Many people should be able to resist this gradient light effect; in addition to the bezel light, the fan blade will also follow the light, which is too cool. ‘
bestbuy618 technology

5 There is a very rich effect in the light effect mode; you can choose automatic light effect or fixed light effect using the remote control; you cannot, however, repeat a mode every day. ‘
bestbuy618 technology

6 In the static state, you can see that the bezel has six light effects, plus the light effect of the fan blade part, and that you can control the flow of light effects via the controller, which is really beautiful. ‘
bestbuy618 technology

7 There are four types of control in the monochrome mode: red, green, blue, and white, and you can match the cool light effect effect using these four light effect modes. ‘
bestbuy618 technology

8 The noise level during operation is also tolerable. Together with the noise from the CPU fan and power supply fan, the overall noise is under 40db, which is barely audible when using the computer on a daily basis. ‘
bestbuy618 technology

9 The performance of this BoneGard XCB cooling fan as a host RGB fan is quite good, the light effect can meet the needs of many people, and the operation effect is very quiet. ‘
bestbuy618 technology

0 Overall, the BoneGard XCB cooling fan performs admirably, and when combined with a transparent case, it can keep the entire host cool. The remote control experience of the light effect is also very powerful, the built-in controller, you can later expand more LED light bars and RGB fans, if you are a bit of a computer installer, you can try this fan Oh
bestbuy618 technology

1