Huawei P30 Pro Disassembly: Witness Together The Inner Workings Of The Domestic Machine King


[Bestbuy618 mobile channel]The Huawei P30 Pro is without a doubt the most eye-catching domestic machine in the first half of the year, whether it’s the superb 50x zoom function or the excellent night shooting ability, both of which are inextricably linked to Huawei’s years of research and development in the field of photography. In the recent Bestbuy618 also received Huawei P30 Pro review machine, at the same time we invited the geek repair engineers, the latest flagship together with the disassembly, explore the internal structure of this latest flagship phone. Today we will show you the disassembly process of the Huawei P30 Pro, starting with the victim of this disassembly – the emperor Huawei P30 Pro native. We received the main promotion of the sky mirror color scheme, the product’s back shell is very beautiful, in different light can present a beautiful color, but this piece of the back shell is not without flaws, the most obvious being – easy to stay fingerprints.

First, the back of the phone is heated by a heating pad, and the backing is heated for about two minutes before the official disassembly can begin.

Dismantle the machine first from the bottom, for this type of sealed more tightly machine, it will be better to remove some with some soluble glue Ji, then use a hard card to cut along the phone a week, the glue of each part will be separated, and you can open the Huawei P30 Pro with just a little force at the bottom.

Although it does not appear difficult, it is not easy for the average person to perfectly disassemble the rear shell; after all, the glass rear shell is both thin and brittle, easily broken or even cracked, so non-professionals are not recommended to disassemble the phone. After removing the back cover, the top camera module is very eye-catching, and the rest of the phone is still covered inside. This P30 Pro still uses two-way charging, so the coil has more connection points than one-way charging products.

The next step in the disassembly process is to remove the protective frame and the induction coil covering the battery. After removing a number of screws, the protective frame was also removed, and then the large battery and motherboard were exposed. This step is repeatedly stressed by the engineer, only after the power is disconnected, to ensure that the next steps are safer.

As you can see, the large 4200mAh battery takes up nearly two-thirds of the internal space in this phone, while the motherboard takes up less than one-sixth of the space, and even with the quad-camera module, it takes up less than one-third of the space. The motherboard’s delicacy is astounding.

The vertical arrangement is also required by the design of the camera module; after all, the width of the product is limited, and it is difficult to set such a multi-lens shooting module horizontally. After removing the camera module, you can see that the telephoto lens is separated from the other lens modules; because it is a more advanced periscope structure, it also uses the horizontal setting, placed at the bottom of the other cameras. Even though the motherboard is reserved for the opening of the under-screen speakers, they are integrated in this small area.

We know that the P30 Pro employs a more avant-garde screen sound design in order to avoid opening the front screen, and after disassembly, we can also see that there is still a speaker set up inside the body close to the back of the screen, in order to achieve the screen’s sound. If we do not pay special attention during our call test, it is difficult to tell the difference between the screen sound and traditional speakers. Next, remove the small plate located at the bottom of the body, corresponding to the SIM card slot and the bottom speaker.

The two sides of the alignment include call/WiFi/NFC antennas, as well as the connection line connecting the motherboard and SIM card small board. According to the disassembly engineer, the SIM card independent small board design on this phone, combined with the unique double-sided SIM card slot design, can greatly reduce the space occupied by the phone’s interior. (Huawei Mate 20 users here forcibly insert a wave: the double-sided design is certainly good, and the card slot 2 can use Huawei’s unique NM memory card capacity expansion, but choosing one of two is still embarrassing.)

The bottom of the small plate has been dismantled, and the disassembly process is complete. According to the engineer, most curved screen replacements involve replacing the majority of the screen along with the frame as a whole, that is, from the top to the bottom, in addition to the battery part, and even a portion of the screen formation that includes the battery. This also means that if the curved screen phone’s screen is broken and we want to replace the screen, in addition to the part we disassemble under the other is replaced with a new, which is very different from our previous perception.

The above is the disassembly of the P30 Pro after the whole (fen) family (shi) blessing (tu).

First and foremost, this phone is not difficult to disassemble, and compared to previous Huawei phones P20 Pro, Mate20, and so on, the difficulty is not increased, but the disassembly of the rear shell will be a big test. Second, the phone’s sealing is good, but once the repair is done, it is difficult to guarantee whether the sealing can be restored before dismantling, which means that after the dismantling of the IP68 level of three-proof ability is basically written off Furthermore, we can see that the phone’s screws, while numerous, use a unified specification product, so that in the disassembly and repair can be assured that mixed, compared to the screw specifications of many iPhone, this is very friendly to repair personnel.

The disassembly of the Huawei P30 Pro comes to an end here, but after this disassembly, we discovered a small egg worth pondering, so please continue to follow Bestbuy618 cell phone channel’s subsequent reports.